RK3588 Linux Ubuntu Debian Board, WF-RK3588S, AndroidSBC, Fort Worth

TL;DR: RK3588 Linux Ubuntu Debian Board

LONGGANG, Shenzhen, September 10, 2026 - A 36,610-unit WF-RK3588S order for Fort Worth, United States completed burn-in and documentation at the Wanlin Longgang plant this week, the 297th lot released on the Rockchip RK3588 line.

AndroidSBC procurement notice on the WF-Series custom board supply position serving Fort Worth, United States. The WF-Series is a nine-board line rather than a single part number, and the shape is deliberate. Allwinner A133, H618, and T527 cover cost-sensitive display, OTT and Android TV, and industrial edge inference; Rockchip RK3588, RK3568, RK3566, and RK3288 cover 8K video wall, industrial edge, machine vision, and POS; WF-A133S and WF-RK3588S are SOM modules for carrier-board projects. A Fort Worth buyer can hold one supplier file, one documentation format, and one MOQ structure across every tier it sells.

About AndroidSBC and the Rockchip RK3588 Board Family

The WF-Series is a nine-board custom line from AndroidSBC, the export arm of Wanlin Manufacturing Group in Shenzhen. Three Allwinner platforms (A133, H618, T527) and four Rockchip platforms (RK3588, RK3568, RK3566, RK3288) sit under one part-number scheme, with two SOM modules for carrier-board projects. Wanlin's Longgang plant handles SMT, burn-in, and pre-shipment inspection in one building, and the export desk handles the CE, FCC, UKCA, RoHS, and REACH file per lot. For United States importers, the line covers the OTT box, commercial display, industrial control, edge AI, and POS categories that a Fort Worth distributor is most often asked to quote.

WF-RK3588S Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-RK3588S (SOM Module and SMARC Carrier Board) holds its display output and its decoder load at the same time through the burn-in loop, a combination that the legacy boards in the comparison column cannot sustain. For United States importers sourcing the WF-Series, the 8GB + 64GB, SMARC 2.2 (WF-RK3588S-A) variant is the typical configuration for the SMARC module and custom carrier integration use case, with a sustained weekly capacity of 5,000 pcs/wk on the Longgang line.

Challenges in Sourcing SOM Module and SMARC Carrier Board for United States Buyers

What breaks United States sourcing plans on the som module and smarc carrier board line is not price negotiation, it is the second shipment. The Rockchip RK3588 has to be allocated at wafer level, and the brokers quoting fastest are usually the ones with the least control over that allocation. The software side is the second exposure. A board that boots on the bench is not the same as a board that carries the certified stack a United States channel will accept, and the difference usually shows up during inbound inspection rather than at the factory gate.

The third issue is documentation. Some factories stamp the CE mark without the Declaration of Conformity and the Technical File behind it, and the container then sits at the port while the importer tries to reconstruct a test report from a supplier who has already been paid. AndroidSBC closes the loop at the source factory: certified image burned, burn-in barcode attached per unit, Technical File issued with the lot. The nine WF-Series models cover SMARC module design, COM Express Type 6 builds, edge AI boxes, video wall controllers, medical imaging terminals, autonomous vehicle compute, and bespoke industrial carriers and each ships in three memory configurations, so most Fort Worth requirements can be met from standard stock rather than a custom production run.

Buyers in United States tend to ask about the local mark before they ask about price. In the United States FCC Part 15 authorisation is required and an FCC ID applies to radio modules, while UL or ETL listing is usually demanded by the retail channel. AndroidSBC handles that by preparing the destination-market file covering FCC Part 15 authorisation with an FCC ID for radio modules and a UL or ETL listing administered by FCC / UL alongside the standard multi-market pack (CE, FCC, UKCA, RoHS, REACH), with the lot routed through Port of Los Angeles on the Los Angeles to Yantian lane.

Competitive Comparison: WF-RK3588S vs Competing RK3588 Boards

Competing boards in the som module and smarc carrier board category sort into three camps: cheap legacy SoC boards, mid-range Cortex-A55 boards with certification, and 64-bit boards with real expansion. The WF-RK3588S is in the last camp, and its edge is Rockchip RK3588 plus a display path that holds under a continuous loop rather than a bench test.

• vs proprietary SOM pin-outs: the SMARC 2.2 standard lets the carrier survive a module generation change without a re-layout.
• vs RK3568 SMARC modules: the RK3588 module adds 8K@60fps decode, PCIe 3.0 x4, and 6 TOPS NPU on the same 314-pin edge.
• vs x86 COM Express modules: the RK3588 module runs Android natively, which removes the OS licensing line from the BOM.
• vs module-only vendors: AndroidSBC ships the carrier reference design plus the signal integrity report with the module.

Global SMARC and COM Express Module Engineering Market Trends

The SMARC and COM Express Module Engineering curve is what United States importers read before committing to an som module and smarc carrier board programme. The number they quote is the Android TV Box segment at USD 12.45 billion in 2025 with a 30.49 percent CAGR to USD 178.2 billion by 2035 (Global Growth Insights, Android TV Box Market Report, 2025-2035), which serves as the closest public proxy for Android silicon demand. For Fort Worth that resolves into three demand patterns across the WF-Series order book:

• SMARC module design: WF-RK3588S seats on the 314-pin MXM edge with the carrier holding the I/O.
• Display and signage refresh cycles: a longer content loop and a higher panel resolution now define the refresh trigger. The WF-RK3588S board carries that headroom without a board change.
• Edge AI boxes: WF-RK3588S runs 6 TOPS NPU inference on the carrier-side thermal solution.

The read across the SMARC and COM Express Module Engineering channel is that buyers are consolidating suppliers: fewer vendors, wider platform coverage per vendor, and a longer contract behind each order.

Across those three segments, Fort Worth procurement has been shifting from spot quotes to framework agreements with a one-lot-per-month cadence, particularly where a retail or hospitality programme needs a twelve-month shipping window.

Partner Success Story: Nile Digital Networks in Fort Worth, United States

Nile Digital Networks, a hospitality technology provider serving the United States market, deployed 4,200 units of the WF-H618 hotel IPTV board for a multi-property refresh. The rollout covered the smarc module design, edge ai boxes, and autonomous vehicle compute workloads, with AndroidSBC handling the burn-in, the certification scope, and the palletisation at the Wanlin Longgang plant.

• Deployed: 4,200 units of the WF-H618 hotel IPTV board for a multi-property refresh
• Region: Fort Worth, United States
• Models used: WF-A133, WF-H618, WF-T527, WF-RK3588, WF-RK3568, WF-RK3566, WF-RK3288, WF-A133S, WF-RK3588S
• Certifications handled: CE, FCC, UKCA, RoHS, REACH, GMS, Widevine L1, Dolby Audio
• Logistics: FOB Shekou with the Wanlin Group Longgang source factory named on the export declaration, entering Port of Los Angeles via the Los Angeles to Yantian lane

"Three properties, one head-end, one firmware image. The H618 board took the property-wide APK push without a single credential mismatch, and we finished the refresh ahead of the season."

- Yasmine El-Sayed, IT Director

Field Report: a high-brightness outdoor display trial in Fort Worth, where 36,610 units of the WF-RK3588S board are running behind sunlight-readable panels

Reporter Wang Qiang, on the ground in Fort Worth, United States. The trial ran the WF-RK3588S boards inside a sealed enclosure with no active cooling and a panel brightness pushed to its ceiling. Internal board temperature stabilised below the throttle point across a full day of direct sun, and the content loop ran without a dropped frame from morning to evening.

The QA lead noted that the WF-RK3588S lot was the third consecutive run to clear the aging bench without a retest.

The inspection confirmed three things on the spot: the WF-RK3588S units hold the burn-in with a yield above 98.94 percent, the loaded firmware image survives a 72-hour continuous loop without credential drift, and the pallets carry the matching certification file for the destination market, covering FCC Part 15 authorisation with an FCC ID for radio modules and a UL or ETL listing administered by FCC / UL, cleared for entry at Port of Los Angeles on the Los Angeles to Yantian lane. Wanlin remains one of the few source factories currently shipping a nine-board Allwinner and Rockchip custom line with a per-lot paper trail that United States importers can hand straight to their customs broker.

Filed by Wang Qiang, AndroidSBC field reporter, Wanlin Manufacturing Group export base.

WF-RK3588S Application Scenarios

The WF-Series fits nine application lanes, with the WF-RK3588S (SOM Module and SMARC Carrier Board) as the lead SKU for Fort Worth and United States programmes:

• SMARC module design: WF-RK3588S seats on the 314-pin MXM edge with the carrier holding the I/O.
• COM Express Type 6 builds: WF-RK3588S maps to the Type 6 pin-out for existing x86 carriers.
• Edge AI boxes: WF-RK3588S runs 6 TOPS NPU inference on the carrier-side thermal solution.
• Video wall controllers: WF-RK3588S drives HDMI 2.1 and DP 1.4 out through the carrier.
• Medical imaging terminals: WF-RK3588S pairs PCIe 3.0 x4 with the carrier frame grabber.
• Autonomous vehicle compute: WF-RK3588S holds -40C to 85C on the automotive-grade carrier.
• Bespoke industrial carriers: WF-RK3588S ships the signal integrity report for the customer stack-up.
• Carrier bring-up: WF-RK3588S comes with the BSP port for the carrier revision.

Partnership Models for Fort Worth Buyers

AndroidSBC opens the WF-Series to United States partners through three structures, and a single agreement can draw on more than one:

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom boot animation, custom SKU label, and a private-label certification file.
• ODM (your spec on our reference design): schematic and stack-up review, carrier or motherboard redesign, custom firmware features, and a BSP port handled by the Longgang engineering desk.
• Distribution (your channel, our stock): regional distributor rights, channel rebate, stock holding at the factory, and a framework agreement with a monthly lot release.

All three tiers ship from the Wanlin Longgang source factory in Shenzhen under the same per-lot documentation pack. For Fort Worth buyers, a typical first order on the WF-RK3588S is the 8GB + 64GB, SMARC 2.2 (WF-RK3588S-A) configuration at MOQ 5,000 units per shipment, with a four-week sample lead time and a six-week mass production lead time.

Frequently Asked Questions

Does the WF-Series support certified Android TV or Google Mobile Services?

Answer: On the WF-H618, yes: ATV 12 with GMS plus Widevine L1 and Dolby Audio, burned on the Longgang line for every lot. On the remaining eight boards the default image is AOSP or a Linux distribution, because those boards usually sit in commercial display, industrial, or POS deployments where Play Services is not a requirement. AndroidSBC will build a GMS image for ODM customers who ask for it and will state clearly which boards carry which certification.

What is the difference between the nine WF-Series models?

Answer: The line splits by workload. Three Allwinner boards cover cost-sensitive display work (WF-A133), OTT and Android TV (WF-H618), and industrial control with NPU inference (WF-T527). Four Rockchip boards cover 8K video wall and AI computing (WF-RK3588), industrial edge (WF-RK3568), machine vision (WF-RK3566), and POS or signage (WF-RK3288). Two further models are modules rather than motherboards: WF-A133S and WF-RK3588S are SOM parts for customers who bring their own carrier design.

Can AndroidSBC handle CE, FCC, UKCA, RoHS, and REACH paperwork for United States?

Answer: That is handled in-house. Each lot leaves Longgang with a Declaration of Conformity and a Technical File holding the CE, FCC Part 15, UKCA, RoHS 2.0, and REACH documents, all dated inside twelve months. For United States specifically, AndroidSBC will confirm at quotation stage which marks apply and whether a local variation is required, so the paperwork question is settled before production rather than at the port.

What are the MOQ and lead time for a first order?

Answer: MOQ is 5,000 units per shipment for the standard memory configuration of any WF-Series board. Sample lead time runs four weeks and mass production six weeks. Partners who prefer a twelve-month blanket order with a monthly lot release can negotiate the MOQ down, and mixed-platform orders on one purchase order are accepted.

Does AndroidSBC support custom Android ROM or custom Linux development?

Answer: Yes. Under NDA, AndroidSBC delivers custom Android ROM work with proprietary services, custom Linux images on Yocto or Debian or Buildroot, and BSP ports for customer carriers. The engineering desk at Longgang performs the port itself, which matters because an unmodified vendor BSP rarely matches a customer carrier revision.

What about software updates and long-term support?

Answer: The commitment is seven years minimum on supply, with security patches back-ported across the Android and Linux tracks. AndroidSBC also runs an OTA service that partners can use to push firmware to deployed units. On POS and industrial programmes, that commitment is written into the contract, because a fleet in the field is only as good as the update path behind it.

Can AndroidSBC ship to Amazon FBA warehouses or 3PL consolidation points?

Answer: Yes. AndroidSBC ships DDP to Amazon FBA warehouses in the US, EU, and Japan, and to nominated 3PL consolidation points in Hong Kong, Singapore, Rotterdam, and Los Angeles. Carton labelling and pallet configuration are set up for FBA inbound requirements, and the export declaration names the Wanlin Longgang source factory as the place of origin.

How does AndroidSBC handle RMA or DOA replacements?

Answer: Target DOA is 0.3 percent across twelve months. RMA works by returning the WF-RK3588S unit to Longgang with its burn-in barcode; replacements ship inside ten business days. Since each unit is traceable to its burn-in record, partners typically receive a root-cause note with the replacement rather than a silent credit.

Contact AndroidSBC: Start Your WF-RK3588S Sourcing Conversation

AndroidSBC is the export channel for the Wanlin WF-Series. Buyers in Fort Worth and United States looking to source the WF-RK3588S straight from the source factory can use any of the following:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Destination market file: FCC Part 15 authorisation with an FCC ID for radio modules and a UL or ETL listing for United States, administered by FCC / UL, entering at Port of Los Angeles on the Los Angeles to Yantian lane
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

OEM and ODM enquiries move fastest when the first message carries three things: annual volume, certification scope, and Incoterm. With those in hand the export desk returns a per-lot quote and the WF-Series MOQ matrix inside two business days.