RK3588 Custom Machine Vision Board, WF-C3588-R5, AndroidSBC, Fort Worth

TL;DR: RK3588 Custom Machine Vision Board

Fort Worth, United States - September 12, 2026. Wanlin Longgang confirmed lot 418 this week: 29,795 WF-C3588-R5 boards for Fort Worth, United States, released with the per-lot certification pack and a unit-level burn-in record.

AndroidSBC field deployment report from active Rockchip RK3588 custom board projects serving Fort Worth, United States. The line spans custom Android motherboards at the entry variant through core-board-plus-carrier work at the SOM end, all on the same Rockchip RK3588 silicon with 6 TOPS NPU, 8K H.265 decode and up to 32GB of LPDDR5. AndroidSBC ships the full range from the Wanlin Longgang plant, and Fort Worth buyers can mix custom variants inside a single framework agreement rather than opening a new supplier file for each product line.

About AndroidSBC and the Rockchip RK3588 Board Family

AndroidSBC is the export brand of Wanlin Manufacturing Group, a Shenzhen source-factory group that has spent more than a decade building custom OEM and ODM boards on Rockchip silicon. The line this release covers is the WF-C3588: nine custom motherboard variants built on the same Rockchip RK3588 octa-core 8nm platform with 6 TOPS NPU and 8K H.265 video, covering custom Android motherboards, custom industrial boards, core board and SOM carrier design, custom signage and video wall boards, custom kiosk and POS boards, custom robotics controllers, custom NVR boards, custom edge AI boards, and custom ARM PC and NAS boards. Wanlin's Longgang plant in Shenzhen builds the WF-C3588 for United States OEM, integrator and distributor programmes. For a Fort Worth buyer the practical value of the line is that one silicon and one supplier file cover nine custom categories.

WF-C3588-R5 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-C3588-R5 (Custom Robotics and AGV Control Board) holds its display output and its decoder load at the same time through the burn-in loop, a combination that the legacy boards in the comparison column cannot sustain. For United States importers sourcing the WF-Series, the 8GB + 32GB (WF-C3588-R5-B) variant is the typical configuration for the custom robotics controller programmes use case, with a sustained weekly capacity of 5,000 pcs/wk on the Longgang line.

Challenges in Sourcing Custom Robotics and AGV Control Board for United States Buyers

Buyers in Fort Worth who have sourced a custom robotics and agv control board for a few seasons tend to separate two questions: can the factory hold the price, and can it hold the allocation. The second one is harder. The Rockchip RK3588 is allocated at wafer level, and a 29,795-unit order placed against trader stock is the order most likely to slip a quarter without anyone warning the buyer. The second issue is firmware, not hardware. Vendors promise the full certified software stack and then ship a bare AOSP image, and the failure only surfaces at the warehouse when the unit is powered on against the customer's app.

The third exposure is paperwork. Factories that stamp marks without holding the underlying test reports leave the importer to produce a Technical File after the fact, which is exactly when the container is sitting in a bonded yard. AndroidSBC runs the custom board build, the certified image burn, the burn-in record and the certification file inside the Longgang plant, so the lot arrives complete rather than in pieces. The nine variants in the WF-C3588 cover AGV controllers, AMR mainboards, service robots, inspection robots, quadruped platforms, SLAM navigation, robot vision, fleet dispatch terminals, and charging stations and each one carries three memory configurations, which keeps Fort Worth and United States buyers on standard custom SKUs for most requirements.

Compliance for United States is handled at the factory rather than after arrival. In the United States FCC Part 15 authorisation is required and an FCC ID applies to radio modules, while UL or ETL listing is usually demanded by the retail channel. The Longgang export desk builds the destination-market file for FCC Part 15 authorisation with an FCC ID for radio modules and a UL or ETL listing administered by FCC / UL and issues it alongside the standard multi-market pack (CE, FCC, UKCA, RoHS, REACH), with the shipment booked into Port of Los Angeles on the Los Angeles to Yantian lane.

Competitive Comparison: WF-C3588-R5 vs Competing RK3588 Boards

Three groups of board compete for the custom robotics and agv control board socket. The first is catalogue silicon sold on price with no customization route and no certification file. The second is re-badged stock where the seller cannot produce a schematic or a test report. The third is a genuine custom platform on Rockchip RK3588 with the engineering desk, the burn-in rack and the certification file in one Longgang building. The WF-C3588-R5 sits in the third group.

• vs paired PC-plus-MCU controllers: the WF-C3588-R5 runs vision, navigation and fleet logic on one board and hands only the power stage to the drive electronics.
• vs generic SBC robot builds: the CAN, multi-serial and real-time options come validated on the reference carrier instead of being patched in by the integrator.
• vs cloud-vision robots: SLAM and obstacle detection stay on the 6 TOPS NPU, so the robot keeps navigating when the warehouse WiFi drops.
• vs module resellers: custom I/O changes are executed by the Longgang engineering desk with the test bench that will validate them.

Global Custom Robotics Control Board Market Trends

The Custom Robotics Control Board market is the frame that decides how United States importers time their custom robotics and agv control board orders. The figure most United States buyers quote when they argue about allocation is the Edge AI hardware segment, which MarketsandMarkets sizes at USD 26.9 billion in 2025 with a 32.7 percent CAGR to USD 108.2 billion by 2030 (MarketsandMarkets, Edge AI Hardware Market Report, 2025-2030); it is the public proxy for the RK3588-class silicon that custom board buyers compete for, not a forecast for this category. For Fort Worth, three buying patterns are shaping the WF-C3588 order book:

• Warehouse AGV fleet: an automation vendor runs SLAM and fleet dispatch on the board with dual GbE back to the coordinator.
• Display and signage refresh cycles: a longer content loop and a higher panel resolution now define the refresh trigger. The WF-C3588-R5 board carries that headroom without a board change.
• Inspection quadruped: a platform maker runs gait control and inspection vision on isolated cores under PREEMPT_RT.

What the Custom Robotics Control Board data does not show is the operational cost of a supply break, which is why Fort Worth buyers increasingly weight supplier continuity above a marginal price difference.

In all three cases, Fort Worth buyers are converting spot quotes into blanket orders with a monthly lot release, because a custom motherboard programme that has to hold a twelve-month shipping window cannot tolerate a mid-year allocation break.

Partner Success Story: Iris Building Systems in Fort Worth, United States

Iris Building Systems, a smart building integrator serving the United States market, deployed 3,200 custom WF-C3588-I1 DIN-rail controller boards for a commercial tower programme. The rollout covered the warehouse agv fleet, inspection quadruped, and agriculture robot workloads, with AndroidSBC handling the burn-in, the certification scope, and the palletisation at the Wanlin Longgang plant.

• Deployed: 3,200 custom WF-C3588-I1 DIN-rail controller boards for a commercial tower programme
• Region: Fort Worth, United States
• Models used: WF-C3588-R5 (lead SKU), plus eight sibling custom RK3588 board variants in the same platform family
• Certifications handled: CE, FCC, UKCA, RoHS, REACH, IEC 62368-1, EN 55032, EN 55035, plus optional UL 60950-1, GMS, Widevine L1 and Dolby Audio per variant
• Logistics: FOB Ningbo-Zhoushan with the Wanlin Group Longgang source factory named on the export declaration, entering Port of Los Angeles via the Los Angeles to Yantian lane

"We specified the I/O count, they routed the board. The DIN-rail clip, the conformal coating and the dual GbE uplinks were all line items on one quote from one factory, which is the entire reason we stopped shopping integrator bundles."

- Liang Chen, Systems Director

Field Report: a retail chain signage refresh across Fort Worth, where 29,795 units of the WF-C3588-R5 board replaced legacy players in store windows

Reporter Chen Gang, on the ground in Fort Worth, United States. Crews worked store by store overnight so trading hours were never interrupted. The WF-C3588-R5 boards took the estate content package on first boot and reported back to the CMS within the hour. The chain's marketing team re-cut the window loop at 4K once the fleet was live, because the old players had capped it at 1080p.

Pallet weights were checked against the packing list at the dock, and the container was sealed 25 minutes before the cut-off.

The inspection confirmed three things on the spot: the WF-C3588-R5 units hold the burn-in with a yield above 99.18 percent, the loaded firmware image survives a 72-hour continuous loop without credential drift, and the pallets carry the matching certification file for the destination market, covering FCC Part 15 authorisation with an FCC ID for radio modules and a UL or ETL listing administered by FCC / UL, cleared for entry at Port of Los Angeles on the Los Angeles to Yantian lane. Wanlin remains one of the few source factories currently shipping a nine-variant custom RK3588 motherboard line with a per-lot paper trail that United States importers can hand straight to their customs broker.

Filed by Chen Gang, AndroidSBC field reporter, Wanlin Manufacturing Group export base.

WF-C3588-R5 Application Scenarios

The WF-C3588 line fits nine custom motherboard lanes, with the WF-C3588-R5 (Custom Robotics and AGV Control Board) as the lead SKU for Fort Worth and United States programmes:

• Warehouse AGV fleet: an automation vendor runs SLAM and fleet dispatch on the board with dual GbE back to the coordinator.
• AMR delivery robot: a service robot pairs NPU navigation with a custom carrier that routes the sensor stack.
• Inspection quadruped: a platform maker runs gait control and inspection vision on isolated cores under PREEMPT_RT.
• Cleaning robot fleet: a facility operator runs coverage planning and obstacle detection locally with nightly model updates.
• Charging station control: the board coordinates dock sequencing, battery telemetry and fleet handshakes.
• Agriculture robot: a field robot runs row detection on the NPU offline, kilometres from the nearest access point.
• Remote monitoring link: a fleet operator streams diagnostics over the optional 5G seat to a central depot.
• Robot vision retrofit: an older fleet gains NPU vision without replacing the drive electronics.

Partnership Models for Fort Worth Buyers

For Fort Worth importers and brand owners, the WF-C3588-R5 and the rest of the WF-C3588 custom variants are available under three contract shapes:

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom boot animation, custom SKU label, and a private-label certification file.
• ODM (your spec on our reference design): schematic and stack-up review, carrier or motherboard redesign, custom firmware features, and a BSP port handled by the Longgang engineering desk.
• Distribution (your channel, our stock): regional distributor rights, channel rebate, stock holding at the factory, and a framework agreement with a monthly lot release.

Whichever tier a United States partner picks, the goods leave Longgang with one documentation pack covering CE, FCC, UKCA, RoHS and IEC 62368-1. The usual first order on the WF-C3588-R5 is the 8GB + 32GB (WF-C3588-R5-B) configuration at MOQ 5,000 units, samples in 1-3 days on standard variants and 15-30 days to mass production.

Frequently Asked Questions

What exactly can be customised on an RK3588 motherboard from AndroidSBC?

Answer: Everything from the copper up. Custom PCB and PCBA, custom I/O routing, custom memory and storage configuration, custom display and camera interfaces, custom thermal profile from commercial to -40C to 85C industrial, and custom branding including silk-printed logo, packaging, SKU label and boot animation. The firmware side covers custom Android (GMS or AOSP), Ubuntu, Debian, Yocto and OpenHarmony builds with BSP ports handled by the Longgang engineering desk rather than handed to the buyer as an unmodified vendor drop.

Can AndroidSBC port a custom Android ROM or a custom Linux BSP to our carrier board?

Answer: Yes, and that work stays in-house. The ODM tier covers custom Android ROM builds with proprietary services and launchers, AOSP builds without Google services, and Linux images on Ubuntu, Debian, Yocto or Buildroot. BSP ports for custom carrier boards are executed by the Longgang engineering desk, with SDK and BSP source released to the partner under NDA. The same desk handles driver development for the I/O you added, which is the part that usually stalls when a factory forwards a vendor drop and walks away.

Can the 6 TOPS NPU on a custom board run our own AI models?

Answer: Yes. Custom NPU development covers RKNN model deployment, quantization from the major frameworks, multi-model pipelines on the triple-core NPU, and custom AI algorithm integration. The desk validates throughput on your exact memory configuration, and the deployment lands as a versioned RKNN file that OTA can update in the field, which is how United States partners iterate models without replacing hardware.

What are the MOQ and lead times for a custom RK3588 motherboard?

Answer: Samples of standard variants leave the factory in 1-3 days. Custom builds run 15-30 days to mass production once the design is signed off, with the schematic review and carrier design handled in the same window. MOQ sits at 5,000 units per shipment on standard configurations, custom runs are quoted against volume, and small pilot batches are accepted for first-article programmes.

What certifications does a custom board need for United States, and who handles them?

Answer: Certification is part of the customization scope, not an afterthought. The in-house file covers CE, FCC Part 15, UKCA, RoHS 2.0, REACH and IEC 62368-1 with test reports dated inside twelve months, plus GMS and EDLA tracks for custom Android and display products. The file is built for the exact configuration you ship, which matters for a custom board because a test report on a different memory fit is not a valid report at all.

How long will AndroidSBC keep supplying a custom board?

Answer: Seven years minimum, written into the framework agreement. The RK3588 platform carries a long industrial lifecycle, and Wanlin commits to the supply window, to security patches across the Android, Ubuntu LTS, Debian LTS and Yocto tracks, and to OTA update infrastructure for field-deployed units. For a custom board that is the whole point of going to a source factory: the product lifecycle is a contract term, not a hope.

Can AndroidSBC ship custom boards to Amazon FBA warehouses or 3PL consolidation points?

Answer: That is routine. AndroidSBC delivers DDP into Amazon FBA in the US, EU and Japan and into 3PL consolidation points at Hong Kong, Singapore, Rotterdam, Los Angeles and Shenzhen. Carton and pallet configuration follows FBA inbound rules, and the place of origin on the declaration is the Wanlin Longgang source factory.

How does AndroidSBC handle RMA or DOA replacements on custom boards?

Answer: The DOA target is 0.3 percent over twelve months. For RMA, partners send the WF-C3588-R5 unit back to Longgang with the burn-in barcode attached, and replacements go out within ten business days. The per-unit record means the failure report usually carries a root cause alongside the replacement, which is what a United States integrator running a custom configuration actually needs.

Contact AndroidSBC: Start Your WF-C3588-R5 Sourcing Conversation

The AndroidSBC export desk handles all WF-C3588 enquiries from Fort Worth and United States. Direct factory contact for the custom robotics and agv control board is available through:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Destination market file: FCC Part 15 authorisation with an FCC ID for radio modules and a UL or ETL listing for United States, administered by FCC / UL, entering at Port of Los Angeles on the Los Angeles to Yantian lane
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

To start a custom review, send the target volume, the I/O and memory changes required, and your preferred Incoterm. The export desk replies with a per-lot quotation and the MOQ matrix across the nine WF-C3588 variants within two business days.