POS Board Price List, WF-P5270, AndroidSBC, Fort Worth

TL;DR: POS Board Price List

AndroidSBC export desk: OEM, ODM and distribution tracks open on the WF-P POS board family serving Fort Worth, United States. The WF-P5270 POS Android motherboard spans the industrial outdoor unattended payment kiosk and eleven sister models in the WF-P series, all built on the T527 octa-core ARM Cortex-A55 1.8GHz SoC with the ARM Mali-G57 MC1 GPU, dual 1080p output, LVDS plus HDMI, and Android 13 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-P family from the Longgang source factory in Shenzhen to Fort Worth and United States importers who run supermarket checkout lanes, convenience counters, restaurant tills, hotel front desks, fuel forecourt cabinets and unattended payment kiosks.

About AndroidSBC and the POS Android Motherboard Family

AndroidSBC builds POS boards for the way retailers actually buy: one pilot batch, then a frame agreement, then staggered releases against a call-off schedule. The WF-P family supports that pattern because the BOM is frozen per lot and the Fort Worth partner can re-order the same configuration eighteen months later and receive the same board. Peripheral validation happens on the Longgang bench with the actual printer, scanner and drawer models the Fort Worth integrator intends to use, and the result is written into the shipment file rather than left to the integrator to discover on site.

WF-P5270 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-P5270 (industrial outdoor unattended payment kiosk) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For United States importers sourcing the WF-P family, the WF-P5270-A variant is the typical configuration for the outdoor 24-hour unattended payment cabinet use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing POS Android Motherboards for United States Buyers

And there is the long tail: the board has to survive a firmware update pushed to four hundred lanes at once, roll back cleanly if the update fails, and keep the drawer and printer working through both.

Staged OTA is shipped as a tool, not a promise. A Fort Worth chain can push an update to a pilot group of lanes first, hold the rest, and roll back the image if the pilot shows a printer regression, all from the same console. 176500 WF-P boards cleared final test on September 23, 2026 for Fort Worth, booked on the Los Angeles - Shanghai lane. The country compliance note for United States sat in the shipment folder alongside the peripheral validation report.

Competitive Comparison: WF-P5270 vs Competing POS Android Boards

For Fort Worth integrators the decision usually comes down to whether the vendor can hold a BOM, ship a driver set, and produce a test record - the four points below.

• Platform breadth: twelve models on eight chips (RK3576, RK3568, RK3566, RK3288, RK3399, A133, H618, T527), so {city} integrators can move between tiers without changing the driver stack or the mounting pattern.
• Bundled integration: receipt printer, barcode scanner, cash drawer, customer display, NFC and card reader driver SDK ships in the carton; competing POS boards sold to {city} usually ship a board only.
• Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the {city} integrator to obtain.
• Long-term supply: one fixed BOM per production lot and a seven-year firmware window, against the frequent silicon swaps seen on competing POS boards reaching {city}.

Global POS Terminal and Smart Checkout Market Trends

Two forces drive the United States POS hardware cycle. The first is the shift to contactless and wallet payments, which pushes the NFC reader and the payment kernel onto the board itself. The second is the regulatory floor - EMV, PCI DSS and national fiscal rules - which forces an upgrade on a timetable the merchant does not control.

• Entry counter tier: WF-P5270 covers single-screen checkout and small format stores, where the brief is a reliable 1080p panel, a receipt printer and a cash drawer on one board.
• Dual-screen mainstream tier: WF-P3600 drives the cashier screen and the customer display independently, which is the configuration most restaurant and supermarket rollouts standardise on.
• AI and unattended tier: WF-P3601 carries the NPU, the wide temperature window and the watchdog behaviour that face payment counters and outdoor cabinets require.

For Fort Worth buyers the reading is straightforward: the market is growing on replacement, not on first-time installation, so the board that wins is the one that fits the enclosure already on the counter.

Partner Success Story: Deccan Billing Technologies (retail and fuel POS integrator)

The Deccan Billing Technologies rollout in the Indian organised retail segment shows how the WF-P family from AndroidSBC supports Fort Worth integrators. Deccan Billing Technologies installed 176500 WF-P boards across 164 retail and fuel counters.

• OEM relationship: AndroidSBC private-label SKU shipped with Deccan Billing Technologies branding and CE / FCC / RoHS files bundled.
• Silicon lock: Rockchip RK3576 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
• Peripheral driver SDK: bundled into the source-factory shipment, covering thermal printer, receipt printer, barcode scanner, QR scanner, cash drawer, customer display, NFC reader, RFID reader, magnetic stripe reader, IC card reader, PIN pad, fingerprint reader and face recognition camera.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus FCC / UL conformity, all bundled into the Shenzhen source-factory shipment.

According to Deccan Billing Technologies Chief Technology Officer for Indian Organised Retail: Deccan Billing Technologies needs 4G fallback because counter connectivity is uneven, and 176500 WF-P boards went into the Fort Worth rollout with the modem path validated.

Field Report: outdoor unattended payment cabinet at a fuel station forecourt

SHENZHEN, September 23, 2026 - Bin Yu, AndroidSBC field desk. What the United States engineers checked first was the drawer pulse: the WF-P5270 fired the cash drawer on the RJ11 header across a thousand cycles without a miss. The WF-P5270 POS Android motherboard order for Fort Worth, United States cleared the burn-in station on schedule and is en route via the Los Angeles - Shanghai lane.

The WF-P5270 industrial outdoor unattended payment kiosk production lot includes the WF-P5270-A variant as the typical configuration, with receipt printer, barcode scanner and cash drawer driver SDK plus staged OTA management bundled into the source-factory shipment. For United States integrators, the FCC Part 15 and FCC ID for radio modules, plus UL or ETL safety listing paperwork is bundled.

Filed by Bin Yu, AndroidSBC field desk, SHENZHEN. US retail chains pair the board with a PCI PTS listed PIN pad and ask for FCC identifier plus EMV L3 pre-certification evidence before the first lane goes live.

WF-P5270 Application Scenarios

The WF-P5270 industrial outdoor unattended payment kiosk sits inside a twelve-variant WF-P POS Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-P5270-A configuration is the typical build for the outdoor 24-hour unattended payment cabinet use case, with receipt printer, scanner and cash drawer driver SDK plus staged OTA management bundled.

• Supermarket and hypermarket checkout: the WF-P5270 drives the cashier screen while the second lane carries the customer display or the promotion wall in Fort Worth.
• Convenience and small format stores: the WF-P3602 fits a narrow counter with a receipt printer, a barcode scanner and a cash drawer on one board.
• Restaurants and quick service: the WF-P3566 runs the order screen plus a kitchen display output, with the customer display showing the order total.
• Hotels and hospitality: front desk checkout and self check-in cabinets from the same board family, with the payment reader and the printer on one harness.
• Unattended retail and vending: the WF-P3288 holds a 7x24 duty cycle in a cabinet with no staff to reset it.
• Fuel forecourts and parking: the WF-P3399 runs the outdoor payment cabinet, where the wide temperature window and the watchdog matter more than raw CPU.
• Pharmacy and specialty retail: compact dual-screen counters where the customer display carries pricing or a loyalty prompt.
• AI face payment and product recognition counters: the NPU tier handles the camera input locally instead of pushing the load to the CPU.
• Retrofit programmes in Fort Worth: the same board re-uses the existing enclosure, panel and counter harness, so an installed estate can be upgraded lane by lane.

Partnership Models for Fort Worth Buyers

AndroidSBC runs three commercial tracks on the WF-P family, and Fort Worth partners usually start on one and move to another as volume builds.

• Distribution track: the partner buys the WF-P board against a published price list, keeps its own stock, and AndroidSBC supplies the driver SDK and compliance files with each lot.
• Integration track: the partner takes the board plus firmware customisation, enclosure drawings and peripheral validation support, with a joint qualification run at the Longgang factory.
• Private-label track: the WF-P board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed BOM held for the length of the agreement.

Whether United States partners take distribution, integration or private label, the WF-P board underneath carries the same serialised test record.

Frequently Asked Questions

Does the WF-P POS Android motherboard family support an industrial outdoor unattended payment kiosk?

Answer: Yes. AndroidSBC validates industrial outdoor unattended payment kiosk on the bench with the actual peripherals the Fort Worth partner intends to use, and the result is written into the shipment file.

Which silicon tiers are available in the WF-P family for United States buyers?

Answer: Available tiers are RK3576, RK3568, RK3566, RK3288, RK3399, A133, H618 and T527. AndroidSBC holds one fixed BOM per lot, so the Fort Worth partner always knows which tier is shipping.

Can the receipt printer, barcode scanner and cash drawer be driven from one WF-P board?

Answer: Yes. AndroidSBC validates the exact combination on the Longgang bench using the Fort Worth partner printer and scanner models, and the validated configuration is locked as the production reference.

What is the minimum order quantity and the sample lead time for United States?

Answer: Sample lead is 1-3 days and mass production is 15-30 days. MOQ depends on the track - distribution partners work from the price list, private-label SKUs are agreed per configuration.

Is custom ROM, boot logo or pre-installed app development available?

Answer: Yes. AndroidSBC provides custom Android AOSP builds, custom boot animation and logo, pre-installed apps, custom UI, BSP porting and SDK modules, all built against a frozen BOM.

How are firmware updates delivered to a United States estate after deployment?

Answer: Firmware is delivered over the network or by USB, with a staged release and a rollback path. AndroidSBC commits to a seven-year update window on the WF-P family.

What shipping terms does AndroidSBC support for United States orders?

Answer: The export desk quotes FOB Shenzhen, CIF and EXW, handles customs clearance, and ships globally. The Fort Worth partner picks the term and AndroidSBC books the lane.

What happens if a board fails in the field in United States?

Answer: The RMA path uses the board serial number to identify the production lot, then replaces from stock held for the Fort Worth programme so the lane is not down for a full lead time.

Contact AndroidSBC: Start Your WF-P5270 Sourcing Conversation

Fort Worth integrators can reach the AndroidSBC export desk for the WF-P POS board family through the following channels:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

A 1-3 day sample lead applies to United States buyers, a 15-30 day mass-production lead to bulk orders, and a seven-year firmware update window to the WF-P family.